附近找个女人打抱私聊

 

LED soft light with instructions

LED soft light with instructions
LED flexible strips can be used for home decorative lighting, commercial lighting and some special lighting. It has a wide range of applications and is one of the most popular and welcome decorative and lighting products. The more people choose LED soft light strips for decoration and lighting. The more you come.
Since the LED flexible strip is a new type of environmentally-friendly decorative lighting product, many people do not fully grasp its use method, and improper use will cause certain damage to the product. Therefore, Xin Shengkai is here to explain the installation and use of LED flexible strips.
The instructions for using the LED flexible strip are as follows:
1. The power supply voltage should be marked with the LED flexible strip and the appropriate fuses installed.
2. If the lamp body is damaged, please cut off this part immediately and do not continue to use it to avoid danger.
3. Do not wrap it with any objects during use to cover the LED flexible strip.
4. Need to flash, gradient and other effects, you can use the LED controller.
5. The installation is fixed. It is not possible to use a metal material such as a wire to tightly tie the lamp to prevent the wire from falling into the LED flexible lamp strip, causing a short circuit or burning.
6. The interface must be firm and there is no hidden danger. When installing outdoors, the interface must be sealed with glass glue to ensure that no water is supplied at the interface.
7. Only two sections of LED flexible strips with the same specifications and voltages can be connected in series, and the total length cannot exceed the maximum length.
8. Install the LED light strip in cold weather, first power on for a few minutes, make the light body soft, easy to bend, and then power off installation.
9. Do not pass the power supply during the installation or assembly of the lamp strip. Only when it is connected, installed and correct, can the power be turned on.
10. Although the LED flexible strip can be cut at will, it can only be cut at the strip marked with scissors.
The popularity of LED flexible strips is getting higher and higher, and the scope of use is becoming wider and wider. After purchase, consumers can only ensure the efficiency of their installation and maintenance by installing and maintaining them in the right way. A new life of energy saving and environmental protection.
Scan the qr codeClose
the qr code
document.write("")